How to change IMEI Number of a mobile phone.
[100% Working]
Today i'm making another tutorial.I hope it will be another "masterpiece" made by me, because i haven't made any for a while.Most of people might ask, why is it exlusive tutorial.It's because i'm writing this myself and from my own knowledge.There aren't any tutorial on the network about it.
Notes:-
Hello Friend's it isonly for educational perpose [illegal in
every country]
My Research Only My Passion ..
I am Good Vulnerability And Ethical
Hacker ,Cyber Security Expert, See Tutorial Plz Read Note
Introduction:-
The tutorial is about changing the IMEI of a mobile phone.IMEI stands for International Mobile Equipment .Identity.Every phone has IMEI and every phone has it's own unique one, just like IP's.IMEI can't be changed, but that's what the goverment says.
Why are IMEI's used for?
IMEI is used to identify GSM, WCDMA, iDEN and also for some Satelite phones.There's two kinds of IMEI's, one of them are "Blacklisted" and other's are inside of the Clean list.Some cheap phones what's made cheaply, doesn't contain correct IMEI chip and they don't classify as a "Blacklisted" or Inside of the clean list.If GSM can't verify the IMEI, you can't call with the phone.
How does IMEI look and how to find it?
There's two ways to make sure the IMEI.The first way is to write *#06# in the phone and the
phone will give you the IMEI like this
Most of IMEI's has 15 characters.Some of them has 17.They're saying that every IMEI is unique,
but actually it's not."New IMEIs can be programmed into stolen handsets and 10% of IMEIs are
not unique." According to a BT Cellnet spokesman quoted by the BBC
Why does people want to change the IMEI?
If you have read the last chapter, you noticed that i wrote about the "Blacklisted IMEI's".It means
that if some mobile phone has been stoled and the owner of the phone is going to police, the
IMEI will be blacklisted.If the IMEI is blacklisted, you can't call with the phone and it's
worthless.Then the only way to use the phone is to change the IMEI.If someone is asking, why
can't people call with the phone if the IMEI is blacklisted, then the answer is simple : GSM
doesn't verify blacklisted IMEI's.Also the IMEI can be tracked, but that's another kind of process
and police doesnt even use it to locate stolen phones.
You should be aware of the information below if you're buying a mobile phone.There are many
cases if person has bought a mobile phone, but the IMEI is blacklisted and you can't call with the
phone.Also people has bought the mobile phone and has met the seller.The victim has even
called with the phone, but after few weeks, the IMEI appears to be blacklisted.That's so because
IMEI's will be added to blacklist 6-8 weeks after the report.It's because many phones aren't
stolen, but just lost and the owner might find it.
"Softwares to change IMEI"
We have all met these hacking tools what are promising to hack facebook with a single click.We also know that these "Click & Hack" tools aren't working, they're just made to spread viruses.Changing the IMEI is also a interesting subject and ofcourse there are also these fake tools whicha are promising to change the IMEI with a single click.There's also many videos in the YouTube and they really look real, but somehow they aren't working.There are some ways to change the IMEI with software, but it works only with old mobile phones what we're being in use in the 1990's.Also changing the IMEI with software isn't secure at all.It's just like hacking with Proxy, you'll be detected with it.It's like comparying "What's the safest way, hacking with proxy from your home, or with VPN from a cracked WiFi?".
The theory of Changing the IMEI.
In theory, changing the IMEI is the simpliest thing what we can imagine.The IMEI places
on the phone as a chip, so it means we have to remove the chip and add another one.
1)Take your phone which has it's IMEI blacklisted.
2)Make sure to write your blacklisted IMEI down before starting.You can find it by writing *#06# in
the phone.Also it's writtened at the frame behind the battey.
3)Get another phone to took a clean IMEI chip from.
4)Remove the battery and the frame, then remove the IMEI chip on both phones.
5)Now you should have two IMEI chips.The blacklisted one you can throw away and the clean one
you should but back onto the device what was reported as stolen.
6)Turn on the Phone and check the new IMEI by typing *#06#.
Operator Codes
Quote:Operator code is a unique number assigned to every telecommunications
operator in all countries of the world. Operator code consists of two parts: Mobile
Network Code (MNC) and Mobile Country Code (MCC).
How to check does the phone has correct IMEI.
If you have read all the tutorial, you've probably already understood why you have to check the
IMEI before purchasing a phone from a stranger, but i'll still rewrite it because i'm sure that very
few people has read all my text above.If you have read the tutorial, you should know that IMEI's
are getting blacklisted and will become useless.They will get blacklisted if the phone is reported
as "Stolen".For preventing that you have to make sure you're not buying a bad phone.
- Check are the IMEI behind the battery and by writing *#06# the same?
- If you're buying the phone, make sure to visit the mobile service provider.They'll check the validation of IMEI for free.
- Use the site http:/imei.info and enter the IMEI in there.I tried and it worked for my phone.If you're buying a Iphone, but the site shows that the IMEI belongs to Nokia 3310, you should be careful.
Quote from wikipedia :
Quote:"New IMEIs can be programmed into stolen handsets and 10% of IMEIs are not
unique." According to a BT Cellnet spokesman quoted by the BBC.
Structure of the IMEI and IMEISV (IMEI Software Version)
The IMEI (14 decimal digits plus a check digit) or IMEISV (16 digits) includes information on the
origin, model, and serial number of the device. The structure of the IMEI/SV are specified in
3GPP TS 23.003. The model and origin comprise the initial 8-digit portion of the IMEI/SV, known
as the Type Allocation Code (TAC). The remainder of the IMEI is manufacturer-defined, with a
Luhn check digit at the end. For the IMEI format prior to 2003, the GSMA guideline was to have
this Check Digit always transmitted to the network as zero. This guideline seems to have
disappeared for the format valid from 2003 and onwards.
As of 2004, the format of the IMEI is AA-BBBBBB-CCCCCC-D, although it may not always be
displayed this way. The IMEISV drops the Luhn check digit in favour of an additional two digits
for the Software Version Number (SVN), making the format code:
How to change IMEI of a mobile phone. [100% Working] | Security Need ::Learn Advance Hacking::
AA-BBBBBB-CCCCCC-EE
Prior to 2002, the TAC was six digits long and was followed by a two-digit Final Assembly Code
(FAC), which was a manufacturer-specific code indicating the location of the device's
construction. From January 1, 2003 until that April 1, 2004, the FAC for all phones was 00. After
April 1, 2004, the Final Assembly Code ceased to exist and the Type Allocation Code increased to
eight digits in length.
In any of the above cases, the first two digits of the TAC are the Reporting Body Identifier,
which identifies the GSMA-approved group that allocated the TAC. The RBI numbers are allocated
by the Global Decimal Administrator. IMEI numbers being decimal allows them to be distinguished
from an MEID, which is hexadecimal and always has 0xA0 or larger as its first two digits.
For example, the old style IMEI code 35-209900-176148-1 or IMEISV code 35-209900-176148-23 tells us the following:
- TAC: 35-2099 - issued by the BABT (code 35) with the allocation number 2099
- FAC: 00 - indicating the phone was made during the transition period when FACs were being removed.
By contrast, the new style IMEI code 49-015420-323751 has a 8-digit TAC of 49-015420.
The new CDMA Mobile Equipment Identifier (MEID) uses the same basic format as the IMEI.
The check digit is validated in three steps:
1)Starting from the right, double every other digit (e.g., 7 → 14).
2)Sum the digits (e.g., 14 → 1 + 4).
3)Check if the sum is divisible by 10.
Conversely, one can calculate the IMEI by choosing the check digit that would give a sum
divisible by 10. For the example IMEI 49015420323751?,
How to change IMEI of a mobile phone. [100% Working] | Security Need ::Learn Advance Hacking::
to make the sum divisible by 10, we set ? = 8, so the IMEI is 490154203237518.
Thank you guys..................
